| |
|
| |
 scribe
marking METAL
MARKING |
|
|
| |
|  |
| |
| The i 61S and i 113S scribing marking machines
inscribe continuous line characters for high legibility. |
| The i113S Scribe Marker is designed for
deep marking applications before painting or coating.¡¡ |
| The i113S has a marking area for X axis
110mm x Y axis 60mm. |
| Model i113S-30 has a piston length 30mm. |
| Model i113S-50 has a piston length 50mm. |
| |
| Our Worldwide Customers:
EADS, BOEING, PRATT & WHITNEY, SNECMA, TECHSPACE AERO,
GM FORD, RENAULT etc. |
| |
| AUTOMOTIVE INDUSTRY |
| |
|  |
Vehicle Identification Number Marking System
based on i 113S for motor vehicle manufacturers.
Car, Truck and Construction Vehicles Applications.
Traceability of Car Frames: stand-alone portable marking
station equipped with a special positioning tool to mark
VIN numbers on a car frames. |
| |
 |
|
|
|
C 151 & Rotary Axis: D Axis 100-A
Tube or shaft circumference marking and angular marking.
The D axis 100-A rotates the part while it is being marked.
The part is manually clamped in the chuck jaws of the
D axis 100-A.
SPECIFICATIONS:
Clamping diameter: 6 to 100 mm, up to 130 mm
inside clamping. Jaws can be reversed for outside/inside
clamping. Maximum diameter of the part limited to
250 mm.
Part must not exceed 5 kg.
E 8 controller must be equipped with a 3rd axis board
(option). |
| |
| AEROSPACE INDUSTRY |
| |
 |
Portable indent dot marking machine.
This marking gun is equipped with a special tool to ensure
a better positioning on the part to be marked.
The turbine shift is driven in rotation with powered
rollers. The angular rotation is controlled by
C98 controller for circumference marking. The
I 80 marking head equipped with handles can be mounted
at 4 marking locations.
This marking station requires no PC.
Traceability of Turbine Nozzles
These tags guarantee the traceability of engine crowns. |
| |
| METAL INDUSTRY |
| |
 |
|
|
|
Steel Sheets Marking
Marking window: 270 x 100 mm
4 electromagnetic clamping pads
2 handles and balance hook
The machine is equipped with four electromagnetic pads.
the marking head, whose window is 270 x 100 mm wide,
is held by a balancer due to its integrated hook.
The operator puts the machine down on steel sheets and
clamps with the magnetic pads to ensure the positioning
during the marking cycle. |
| |
| MEDICAL INDUSTRY |
| |
 |
|
|
|
APPLICATION:
1. Operator loads the part and engages a part clamp.
2. Marking cycle is for EC200 2D Dot Pin Mark.
3. The marked part is assembled in a glass tube.
4. The assembly is positioned for reading through the
glass tube; data is linked to
the customer database.
MATERIAL: 30 mm diameter Copper Anode with a Glass
Cap. |
| |
| MECHANICAL AND PLASTIC
INDUSTRIES |
| |
 |
Mechanical Part Marking with 2D Matrix Code.
Scribing Marking Sample & Dot Peen Marking Samples
on steel surface.
Plastic Tag Marking and Various Marking Pins |
| |
| NAMEPLATE & TAG
MARKING |
| |
 |
| Plate Holder mounted for marking on nameplate.
Tag feeders are designed automatically load, clamp, mark
and eject tags. Marking on various nameplates. |
| |
| |
